top of page

KPI Calculations: Numbers Explained

As information can change over time, If you read this outside of 6 months from the original post date, please confirm with your WCR advisor that the information is still valid and accurate.

Dashboard KPIs

When you open the Horizon app, you start on the dashboard, which provides a quick snapshot of the current farm's performance. The dashboard is updated every 20 minutes to show the latest values. A KPI is presented in different ways: as the current value, the weekly average and a trend line. Here is a breakdown of where these values originate:

  • Current value: This indicates the KPIs performance over the past 24 hours since the last update (which is when the dashboard is opened and refreshed every 20 minutes).

  • Weekly average: This indicates the KPIs performance over the past 168 hours (equal to 7 days) since the last update (this is when the dashboard is opened and refreshed every 20 minutes).

  • Trend line: The trend line shows the values of the past 7 days per 24 hours (00: to 00:00), excluding today's value, which reflects the past 24 hours to today (the same as the current value). Keep in mind that updating KPIs starts at 00:00, and then updates each KPI one by one, therefore some KPIs are updated at 00:07 and others are 00:01, but the time interval is always 24 hours, so from 00:07-00:07 or 00:01-00:01.



Click-through

By clicking through, you get access to more recent data, as calculated when opening the KPI. This allows a deep dive into the specific KPIand ensures that you stay informed about the most up-to-date values.

The first click-through level provides 2 values: the value and the average. The value represents the calculation of the last 24 hours and the average represents the calculation of the last 168 hours (7 days).

If you click through to the second level, new values appear. The value shows the calculation in 24-hour increments, for example if it is 4pm, the values are 4 PM- 4 PM- 4PM. The average (color in dark green) shows the calculation of the last 168 hours (7 days). If indicated in red, there is a deviation from the averages, this threshold differs for each KPI and is explained on the Lely Horizon Help page.



Reports

Reports are updated at midnight, starting at 00:00. It may happen that the first report is updated at 00:00 and the last report is updated at 00:09. If the report is updated at 00:09, the value is still calculated based on 24-hour time, i.e. from 00:09 to 00:09 the day before. Opening a report at different times during the day does not affect these values refreshed at midnight. Except for the “today” values, as these are calculated when opening. The different refresh intervals make it difficult to compare numbers, as the KPI value may differ from a report value, but between reports, values with the same parameter can also differ slightly.


Summary



Each KPI is calculated in a different way. To better understand these KPIs, the table below explains each individual KPI in detail.



























30 views0 comments

Kommentare


bottom of page